rok
New Member
Posts: 48
|
Post by rok on Sept 17, 2011 15:53:04 GMT -1
hi im after some advice on where to get front axle drive shaft seals and swivel seals. also how much i should expect to pay for them.
secondly how much difference do the freewheeling hubs make to economy and where can i get them?!
thanks guys.
|
|
abdul
Administrator
GREEN LJ80s
Posts: 3,535
|
Post by abdul on Sept 17, 2011 18:13:05 GMT -1
hi the axcell seals you can still get from Suzuki main dealers they are not to expensive , free wheeling hubs ebay is best bet and well worth getting lot more mpg also saves alot of were on front drive train ect you can fit vitara hubs on a sj if you cant find sj ones assuming we are talking about a sj the best fwh are the aissin ones
|
|
rok
New Member
Posts: 48
|
Post by rok on Sept 17, 2011 23:54:34 GMT -1
brilliant thanks for the help. yes i was talking about an sj. while i have the swivel joint off do you grease the cv's or are the swivels oil filled???...
|
|
abdul
Administrator
GREEN LJ80s
Posts: 3,535
|
Post by abdul on Sept 18, 2011 8:15:27 GMT -1
thats cool with hubs after you have done all the seals leave top king pin out and pump it full of grease we fill ours with as much as it will take about 3/4 tube if you use a normal grease gun , if you fit fwh dont use grease in them just clean and use engine oil to lube them  |
|
rok
New Member
Posts: 48
|
Post by rok on Sept 18, 2011 14:28:31 GMT -1
ok thankyou for the help. i cant seem to find aisin anywhere, ive found avm, mile marker or superwinch. the later are american but do give info on splines to make sure they are correct...
|
|
abdul
Administrator
GREEN LJ80s
Posts: 3,535
|
Post by abdul on Sept 18, 2011 15:46:00 GMT -1
hi supper winch are ok avm are poo they do come up on ebay just dont rush you can get the aissin ones second hand for 40 to 50 pound ish |
|
